Harry Smooth's

Cigar & Vape 

                   221 S. Hopkins Ave                   

Titusville, FL. 32796

321-264-4899

harry@harrysmooth.com

VETERAN OWNED!

 

Hours:

Mon-Fri: 10:00-6:00

 Sat: 10:00-5:00

Sun: Closed

New Saturday Hours 10-5

 

See COVID-19 Update below!

 

 

WARNING:THESE PRODUCTS CONTAIN NICOTINE.

NICOTINE IS AN ADDICTIVE CHEMICAL


 

Active Military,Veterans,Law Enforcement and Fire Fighters Discount with Proper ID!!

Thank You for your Service!!

Veteran Owned!


 ID REQUIRED FOR ALL SALES

12/20/2020: Smoking/Vaping Age has increased to 21....and you MUST be 21 and have a Valid Approved Picture ID to even ENTER the Store! If you are under 21, you will be asked to leave the Store.....We're very Sorry about this, but the FDA Rules!

 

 

Updates: 

 

 

PLEASE READ!!!!!! VERY IMPORTANT!!!

UNDER CONSTRUCTION!!!!!

BRAND NEW WEBSITE COMING IN JUST A FEW OF WEEKS!!!!

PLEASE BE PATIENT WHILE WE UNDERGO THESE MASSIVE CHANGES!!!!

YOULL LOVE IT!

 

 

Harry Smooth's Tobacco & Vape
221 South Hopkins Ave
Titusville, FL 32796
United States

ph: 321-264-4899

harry@harrysmooth.com

Follow us:TwitterFacebook

  • Home
  • CIGARS
  • CIGARS TERMS, Glossary, & Photos
  • New Arrivals (Vape)
  • Vaping Accessories
  • MODS/Tanks/Dry Herb/DIYClick to open the MODS/Tanks/Dry Herb/DIY menu
    • More MODS & Stuff
  • E-Liquids & MORE
  • E- Juice & Accessories
  • RYO & Accessories
  • KRATOM,CBD, Body Cleansers
  • Services
  • Collectables (Vape)
  • Medical Cannibis Devices & Dabbers
  • Vaping Etiquette
  • NEW to E-Cigarettes?
  • All About E-Cigs & E-Cig Myths
  • Po-Man Grill
  • Pictures
  • Miss Harry Smooth's
  • Miss Harry Smooth's 2018/2019 "Miss Kaylie"
  • New FDA Vape Regulations and how they Apply to US!
  • Feedback & Reviews
  • About Us
  • Contact Us/Feedback

VAPING

 

MODS, TANKS, RDA's

Scroll Down to Bottom of Page for the New JOYTECH eVic2, Tesla and HeatVape "Invaders"!

AND

Council of Vapors Royal Hunter, Kindred Mod, Aris & Stratos Tanks....Scroll to Bottom!

I SHOULD have these at the VERY TOP of the Page but this ASSININE Yahoo Site Editor wont let me copy & Paste to the Top! I know, I know...STUPID, but when I try it, everything I copy & Paste here...appears on the BOTTOM of the Page....NOT Where Council of Vapor Products Belong!!! They BELONG HERE...ON TOP!!!!! Grrrrrrrrrrrrrrrrrrrrrrr YAHOO! BUT, I CAN Put some Photos up here heh heh...but just scroll down to the bottom to read ALL about these AWESOME Products!

 

The "ARIS"

the "ROYAL HUNTER"

Close up of The "ARIS"...BAD to the BONE!

24K Gold Plated Posts!!!! WOW!!!

 The "STRATOS"

The "KINDRED" MOD


 

Sigelei 150Watt w/HellBoy RDA

 

TANKS

Again, We have so many Tanks I cant list them all~! BUT you can BET YOUR ASS we have ALL the "LATEST & GREATEST" Tanks on the Market, AND the Best Prices~~~

Aspire Atlantis 2!!

Aspire's Atlantis 2 is the NEW,Upgraded Atlantis! This Innovative Tank System brings improved adjustable Airflow, 3ml capacity, an Optimal cooling System design on the Drip Tip and Sub Ohm Coils that provides the BEST and Extreme Vaping Performance! The New Tank will help Vapers experience purer tastes and Bigger clouds than the Previous Model. Aspire's Atlantis 2 Tank is easy to carry, install and refill. Check it out Below....




And then came  The Mighty "HERAKLES"...

The Herakles Sub-Ohm Tank



 Description
 
  
The Herakles Sub-Ohm BVC Tank by Sense combines the ease of ready made coils with the capability to produce an incredible amount of vapor!

Introducing the Herakles Sub-Ohm BVC Tank by Sense, designed to be used from 30 to 100 watts and now includes Sense's new 0.2 ohm Coil for even more vapor! Producing outstanding amounts of vapor, the Herakles combines the best of both worlds; the ease of replaceable, ready made coil heads with the capability and flexibility to be fired at high wattage! Designed to perform in the same leagues as some of the best rebuildable atomizers, the Herakles features 6 wicking points on the tank and 5 juice entry points on the coil itself to ensure fast and consistent wicking to support the higher input. The vertical coil structure of the .6 and .2 ohm BVC Head produces fantastic flavor and even more vapor than rival tanks, and coupled with an easily adjustable airflow control ring that provides a full variety of airflow, can be a versatile, all in one tank. Featuring a full Stainless Steel construction with a Pyrex glass tank, the Herakles can be filled with up to 3 milliliters of e-liquid. An included widebore delrin and stainless steel drip tip allows for out of the box vapor chasing and high heat dissipation. A copper 510 connection ensures minimal voltage drop for maximal user experience! Extreme vapor production with minimal assembly and hassle. The Herakles Sub-Ohm BVC Tank by Sense.

Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling. 


Product Features:
  • Redesigned coil and base for maximal vapor production and efficient wicking
  • 0.6 Ohm Coil Head Optimized For 50 to 100 Watts
  • 0.2 Ohm Coil Head Optimized For 30 to 75 Watts
  • Incredible Vapor and Flavor Production
  • Delrin and Stainless Steel Widebore Drip Tip
  • 3 milliliter capacity
  • Stainless Steel Construction
  • Pyrex Tank
  • 22mm in Diameter
  • Organic Cotton used in Coils

Product Includes
  • One Herakles Sub-Ohm BVC Tank by Sense
  • One 0.6 Ohm Sense BVC Coil (Preinstalled)
  • One 0.2 Ohm Sense BVC Coil
  • One spare Pyrex Tank section

Advanced User Item. Use at Your Own 

RDA/RBA

Wrap your Own RDA Coils? Scroll Down to our RDA ToolKit Section!!! heh heh.....

 

The "MUTILATOR"

The "Kennedy"



Are You Ready For the Third Innovative Airflow Effect? Introducing the "Hovering Effect"!

Ever since we introduced the concept of "Swirling Effect" and "Showering Effect", we are going to introduce the third airflow effect, we call it the "Hovering Effect"! The Mutilator features a very revolutionary airflow system in which one single huge 4mm airflow holes in the center, surrounded by 8 mini airflow holes spreading out in four directions. This unique design allows air to hug the vapor in all directions, concentrate to a single force of air, shooting the vapor directly up to your drip tip. The result is a more dense, flavorful vapor! 

Product Features:
  • Made out of 304 Stainless Steel
  • 22mm in Diameter so it will fit most of your mod Flush!
  • Custom extreme wide bore drip tip
  • Comes with one wide bore black delrin drip tip, giving you vapor without restriction
  • Full center copper adjustable contact pin for maximum conductivity
  • Heat Fins on top and on the bottom for maximum heating disbursement
  • Split Center Post design for ease of build
  • Innovative "Hovering Effect", which allows vapor to concentrate, and to produce a more dense and satisfying taste
  • Ultra deep juice well that can hold as much as 4ml of juice
  • Copper 510 for maximum conductivity
  • Original & Affordable
  • A Must Have For ALL Cloud and Flavor Chasers!
Advanced User Item. Use at Your Own Risk!

The "Kennedy"

 Description
 
  
One of the Most Unique Airflow Design!

Made in USA


This California made, innovative, RDA solves many of the problems that come with most drippers. The airflow runs from under the deck to within millimeters below the coils. Providing excellent flavor and a dense vape. No more adjusting the airflow on the top cap. The juice well is far deeper than traditional atomizers which allows for less dripping between vapes. The post holes easily accommodate 20 gauge builds. The posts are secured by Philips head screws and the center post made of pure copper. If you are looking to drip less, get better airflow and flavor without having to go to a tank, this is the perfect atomizer for you. 


Product Features: 
  • 100% California made by Kennedy Enterprises
  • 22mm Diamter to fit most of your mods flush!
  • Stainless Steel Construction
  • Copper Center Post for maximum conductivity
  • Innovative Dual Direct Bottom Flow Air Holes
  • Supports Dual 20 Gauge Builds
  • Copper 510 Contacts
  • Huge Juice Well
  • Conical top cap design to give you even more amazing flavor production
  • Clean design with Kennedy beautifully engraved on
  • The innovative bottom airflow gives you unbelievable flavor chasing experience
  • Flavor Chaser's Dream RDA
  • Made In USA
Advanced User Item. Use At Your Own Risk!

 

DOGE RDA's

DOGE V4

Introducing the Authentic Doge RDA by Congrevape is the next generation rebuildable atomizer in the market. The airflow holes are massive and features two Cyclops airholes as big as 11mm, which gives you the ability to build some serious sub ohm! For the airflow control, there are three holes that give you the ability to run this in either single or dual coil mode.


 

MUTATION-X

 

Want Originality? Airflow? Deep Juice Well? Affordability? Meet Mutation X RDA V2! This RDA feature an all new AFC and has 9 airflow holes on each side and it's adjustable! Blowing gigantic cloud has never been easier! Huge Improvements Over V1. 
Designed In USA
The Mutation X RDA V2 is an all US Designed RDA, features upgraded 18 air holes in a diagonal pattern to induce swirling, and its sliding blade styled adjustable airflow control allows you to blow clouds or just for flavor chasing like never before. 

Huge Improvements Over V1:Adjustable Airflow Control is now in a slicing blade style, to induce swirling to the next level! Give you the extraordinary flavor and cloud like never before!Center post is now split, giving user a much easier platform to build (Newbie Friendly)Top cap is redesigned to be wider, allows the stock drip tip to be wider than any standard 510 drip tips to give you unrestricted air delivery (Do not fit standard 510 Drip Tip)Comes with a matching ultra bore black delrin drip tip for cloud delivery and to cool down your vapeBeautifully Engraved With Brand New Mutation X LogoAvailable in Stainless Steel, Black, and Copper Finish (Copper do not have the new Mutation X logo engraving)
Product Features:Made out of 304 Stainless Steel ConstructionSplit SS center post with SS screws (New center post is now split for ease of build)18 air holes in total to have more than sufficient air travel through your coilsAll New Adjustable Air-flows control, due to the new AFC design, the air now can travel in an angel, bringing swirling effect to the next levelTop cap is redesigned to be wider, allows the stock drip tip to be wider than any standard 510 drip tips to give you unrestricted air delivery (Do not fit standard 510 Drip Tip)Deep Juice WellHuge Post HolesTop Heat Sink to disburse heat more quicklyNegative Posts are milled to the deck for max conductivity and rigidityComes with a matching ultra bore black delrin drip tip for cloud delivery and to cool down your vape22mm in diameterBeautifully engraved with Mutation X brand new logoGreat for doing dual coil buildsOriginal & AffordableDesigned In USA

 

((((ALERT))))

  NEW, JUST IN! Harry's now has PRE-MADE COILS!!! Thats RIGHT People, PRE-MADE 24ga & 26ga Coils, READY for your Dripper!

Premier Waya Coils

 

And each pack comes with Japanese Cotton as well!!! No More Coil Jigs, no more searching for the Right size ScrewDriver to wrap your Coils...just drop on into Harry's and YELL...

"HARRY....I GOTTA HAVE SOME COILS"

and thats IT!!! heh heh You GOT EM!!!!!!!!!!


So, not sure what this whole RDA/RBA difference is? Here's the definitions for each:

RBA = ReBuildable Atomizer - These usually have a tank that holds liquid, so you don't have to refill your liquid as quickly as an RDA. You still build your own coils/wicks, but isn't as easy to replace/change/modify as an RDA.

RDA = Rebuildable Dripping Atomizer - You directly drip e-liquid on the wick/coil, it does not hold a lot of liquid at a time. Have to re-fill' liquid more often, but easier to make and change out coils, wicks, and customize the Ohm output.

Mod safety If you have a mod with a bottom-firing switch that has a lock ring, ensure that you have it locked when you aren’t using it. This will prevent you accidentally burning your wick when you set it down upright and starting a fire, or if you have small children around that can potentially get a hold of it. If you have a regulated mod, be sure to lock it if you aren’t going to be using it for a longer period of time. 


DIY Coil Building Stuff

Soooo, ya got an RDA/RBA, and now ya GOTTA Build your own coils, UNLESS, you buy the "Pre-Made" Coils (above)....but most people Like to Build their own....WHY You Ask? Well, myself....I like to be able to control my Resistance for one.....and I want to be in Control of my Wire Type as well! 

So ya come down to Harry's and get yourself one of my Handy Dandy "Coil Building Tool Kits!~ Has EVERYTHING you need to get on the Road to being your own CoilMaster!

  • Comes with Everything you Need
  • 1x Black Vinyl Case
  • 1x Cotten Shears
  • 1x Straight Forceps
  • 1x Bent Tip Forceps
  • 1x #4 Wire Dykes
  • 1x #4 Needlenose Pliars
  • 1x Cone Nose Pliars
  • 1x Tobeco Coil Jig V2
  • 1x Screwdriver w/Asst Heads

 Tobeco V2 Coil Jig

Tobeco Coil Tool

The Tobeco Coil Jig is the Perfect Tool to assist you with all of your Coil Builds!
Wrap any Size Coil with the Included Posts.
Tobeco Coil Jig Features

  • 3/64, 1/16, 3/32, 1/8, & 9/64" Posts for Coil Building
  • 510 Threading on Side of Jig to use as Atomizer Stand
  • Nylon Plastic Thumb Screws
  • Built in Compartment for Storing Posts

 

 

 


Clearomizer Type Tanks

 Kanger "AeroTank"

2 x Dual coil 1.8ohm

Kanger aerotank clearomizer


The Kanger aerotank clearomizer offers the same great features and performance as the Kanger Clearomizer protank series, but with the introduction of stainless material made with dual coil heads inside! The aerotank is still using 510 threaded.

Updated in Kanger aerotank V2:

New Airflow control base
Food grade Stainless steel body
Pyrex tank and Stainless tube is replaceable
Glue Free: All parts are replaceable
Can be fitted with 510 Drip tip

Coil works with Protank-3, Aerotank mini, Evod glass


Features:

- Replaceable Atomizer Heads
- Bottom Coil
- Pyrex Glass Tank
- Advertised with a 2.5ml capacity

Tips:

The metal tube in the center of this Clearomizer leads from the mouthpiece to the battery end. Avoid getting liquid in this tube when filling the Clearomizer. When unfastening the base (atomizer head) to refill the Clearomizer, the seals are temporarily broken and liquid will leak from the mouthpiece or escape into the center tube. Always wrap a cloth or piece of tissue around the mouthpiece when unfastening the base of the Clearomizer.

Gurgling noise or leaks: This is a sign that liquid has found its way into the metal tube in the center of the Clearomizer (and usually occurs after a refill). Ridding the center tube of liquid will resolve the issue. To do so without emptying the tank, remove the Clearomizer from the battery, wrap a cloth or tissue around the battery end of the Clearomizer and blow through the mouthpiece. 
The atomizer head of the Protank can unfasten when unscrewing the tube or base. Always secure the atomizer head before reinstalling the base of the Protank.
It is normal to find a small amount of liquid in the battery contact area when removing the Clearomizer or any atomizer. We recommend cleaning the battery before charging it.


When possible, keep the tank full and never below 1/3 full of eLiquid ("topped off"). This helps maintain the "vacuum" in the tank and prevent leaks.
Atomizer heads have an average lifespan between 10 to 20 days. When the atomizer head wears down, it may begin to leak. Replace the atomizer head with a new one if available.


Package Contents:

1 x Kanger aerotank mega (Pyrex tank, top cap, bottom cap and Airflow control 510 base)

1 x 510 Drip tip

1 x Stainless Tube

1 x Glass Tube


Kanger ProTank III


Description:

The Kanger Protank 3 is glue-free and fully disassemble-able! 
The Kanger Protank 3 offers the same great features and performance as the Kanger Protank - II but with the introduction of a dual coil atomizer head! The Protank 3 is also 510 threaded and will work on a 510 threaded MOD without the need for an adapter.


Updated in Kanger Protank 3:Stronger baseGlass tank is replaceableGlue Free: All parts are replaceableCan be fitted with 510 Drip tipReplaceable Dual Coil Atomizer Heads (NOT interchangeable with Protank 1 and Protank - II)

Bottom CoilGlass TankAdvertised with a 2.5ml capacityUnlike other Kanger Tanks, the Protank is 510 Threaded and it will work on 510 thread MOD/APV without the need for an adapterDimensions: 1-15/16"L x 3/4"D (without drip tip)


KANGER EVOD 

Kanger EVOD batteries and tanks are designed to work well together.
The coils in EVOD tanks are located at the bottom so the wicks are always saturated with e-juice. Removable heads allow you to replace atomizers as often as you want without having to buy a new tank every time. Each clearomizer is capable of holding 1.6ml of liquid.


EVOD batteries feature the most advanced eGo technology. They operate on a constant output of 3.7 volts all throughout each discharge cycle to ensure a consistently powerful vape from full charge up until your battery is completely drained.


The Kanger EVOD starter kit gives you two fully assembled electronic cigarettes and five replacement atomizer heads. Add some e-liquid and you’ll be able to enjoy an awesome vaping experience in no time
The Kanger EVOD is available in black or stainless steel with 650mAh battery capacity. To turn your ecig on or off, click the power button 5 times.


Each Kanger EVOD Starter Kit contains:    2 EVOD batteries (650mAh)    2 EVOD clearomizers (bottom changeable coil)    5 bottom heating coil heads (2.2 ohms)    1 eGo USB charger    1 wall adapter (US)    1 instruction manual

EVOD Style Tanks are one of the most Popular with the Beginner Vapist!! Its Rugged, Easy to Fill and Easy to use! They come in a Multitude of Colors and are Extremely Durable. The Coils/Wicks are Cheap, and easy to change for a Beginner VapeHead...


Dry Herb Vaporizers

HEBE Titan II

 The HEBE Titan-II (Titan 2) Vaporizer is a robust vaporizing instrument featuring an intuitive temperature control system.It offers a wide-mouth heating chamber for easy loading and cleaning and features a durable and rugged rubberized exterior.Temperature control down to the degree offers a fully customized vaporization experience.Cloud chasers love the HEBE Titan.

Check out Mr. Puff's Titan-II Video Review HERE

 

ATMOS R2

A Great Redesign
The Atmos R2 is the dry herb and wax brother of the Atmos Optimus V2 (which is for wax). It has a great feel to it, and looks really nice. However, it's probably best to think of the R2 as a redesign vs a revolution on the Rx. It's the same basic principle, but with some nice new touches.
 
What's different?
The LookThe first noticeable difference with the Atmos R2 is the look. It's sleeker and more unique than the vaporizer pens that have now become ubiquitous.
 
The FeelThe new look also comes with more than just visual benefits. The battery fits a bit more comfortably in the hand, and the power button has been given a rehaul. Gone are the days of the rubber button (which some customers had complaints with). Now, there's a much sturdier plastic button which feel much better.
The BatterySpeaking of the battery, it's also been given an upgrade. Like the Optimus V2, this battery is a bit longer lasting than the Rx, so you have more continuous power on a full charge. We'll have a more specific time-frame for you in the updates to this review.
 
The Heating ChamberFinally, and arguably, the most important revision is the heating chamber and heating coil. The buzz word is that this is anodized. That's a fancy term, but to translate the benefits: more durable, less susceptible to corrosion, and improved taste.
Aside from these benefits, the heating coil also gets much hotter than the Rx and Junior models. This level of heat allows it to truly burn through all the herbs you pack into the chamber. And that's good, because the chamber is also a bit larger. No more "packing a pinch" for best hits. The heating coil will eagerly tear through your herbs.

What's the Same?
Combustion vs VaporThis truly is the never-ending battle with "vape" pens. For herbs, many pens will combust your herbs using them they way they come out-of-the-box. Unless you place some sort of buffer between the herbs and the heating coils, you'll combust and not vaporize them. This is as true with the R2 as it was with the Rx and Junior.
Our recommendation is to use glass screen filters. However, since the chamber is larger, you'll need a larger glass screen than the standard size found at most sites. Of course, we have larger glass screens here and include them with your R2, so no worries! You'll also need to use metal mesh filters in conjunction with the glass screen to truly prevent combustion and produce vapor. Again, we have you covered.
 
Our guide to vaporizing with the R2
Requires custom-fitted glass screen filters (and, possibly, metal mesh screens)
Remove the spring from the mouthpiece (it will get in the way)Place one of the glass screen filters inside the heating chamber. This will prevent the metal mesh filters from making contact with the heating coil(which is bad) if you have to use themFirst, try Steps 7-9 with just one glass screen. If this causes combustion, try 2, then 3 glass screens. If 3 glass screens still cause combustion, you're going to need the mesh screens. Proceed to Step 4.Place 2 to 3 metal mesh filters inside the chamber. Press and shape them with the packing tool so that it forms a concave, inverted dome shape inside the chamberPlace your herbs into the metal mesh dome you've formed inside the chamberScrew the mouthpiece on. If the mesh screens are in the way, either bend the edges inward, away from the threading, or clip them so they don't prevent you from screwing on the mouthpieceWith the mouthpiece on, press the power button to begin heating up the chamber.Hold the power button down for about 5-7 seconds at a time, then release before the automatic shut-off begins. Rapidly press it down again, and repeat. Do this for 15-30 seconds.Your chamber should now be hot enough to produce vapor from the herbsTip: When you heat the chamber for the first time, try taking a hit. If you immediately get smoke, note that this is NOT vapor. Some herbs probably fell onto the heating coil (vapor takes much longer to cook up, so immediate smoke is not vapor). Either take hits until the herbs on the coil are all spent, or heating the chamber and re-pack more carefully.

Operation and Maintenance
Say it with me: click the power button fives times rapidly to turn the device on and off. Some things never change. Also, we still recommend removing the spring from the mouthpiece to get better hits. Cramming herbs right up next to the heating coil actually doesn't help much. It limits the amount of smoke, and makes a bigger mess inside of the chamber. However, because the heating coils are now hotter, you'll still be able to get good hits regardless of whether you keep the spring in or out. 

 

YOCAN 94F

Made for combusting large amounts of dry herbs and vaporizing (conduction)Not designed for use with variable voltage batteries (standard batteries work best)Amount of vapor with herbs (using glass screens) = medium (requires proper glass screen technique, see instructions below)Custom-fitted glass screens for the chamber are now availableAmount of vapor with wax = n/aAmount of combustion (not using glass screens) = very highFlavor of vapor = minimal
Yocan 94F Dry Herb Vaporizer Pen
Use this portable pen-style device to smoke or vaporize dry herbs... Let's skip the formalities and get straight to the point, though: the heating chamber is HUGE. Apparently in the world of vaporizer pens and electronic pipes, size matters. And the 94F can boast about 2 pipe-sized bowls worth. Well... Suppose that depends on the bowl. Quote us on that for now, and then let us know if you beg to differ. That sounds fair.
What's Included With Each Kit:
The Standalone AttachmentIf you already have a 510-thread battery and charger, and you're just adding to your collection, this option is for you. (And your collection just got better). Please note, the 94F is not designed for use with variable voltage batteries, though. Standard batteries work best.
Includes:
Yocan 94F dry herb attachment3x total heating coils (one already connected and two spares)1x cleaning brush 
Add 3 glass screen vape filtersInclude 3 glass screen filters custom-fitted to the 94F chamber. Glass screen filters helps transform the 94F from an electric combusting pipe into a portable vaporizer.
How to vaporizer using glass screens:
Place 1-3 glass screens directly onto the heating coil (works best with 2).Grind your herbs and place a pinch or two onto the glass screen. Packing less herbs makes producing vapor quicker and easier.If you're using just 1 glass screen: Begin heating the chamber and start slowly inhaling almost immediately. If you wait too long, you may combust.If using 2-3 glass screens, you'll lessen the risk of combustion, but it increases how long you must heat the chamber.Continuously heat the chamber for 10-20 seconds. You must bypass your battery's automatic shut-off (which occurs after about 7 seconds) by releasing the power button just before the battery shuts off, then rapidly press and hold it againAfter about 20 seconds, slowly inhale. You should inhale vapor (which you can taste and see when exhaling)If you produce combusted smoke, try using more glass screens or powering the device for less timeIf you don't produce any vapor, try using less glass screens or powering the device for longerFor help, check out the tutorial video belowGlass screen vape tutorial
Full, written guide to vaping with glass screen filters
 
Add battery and chargerIf you're NOT the type of person that has spare 510-thread batteries littering your closets, this option is for you. Our batteries are longer lasting than most other shops, coming in at 1100 mAh vs 650. If that means nothing to you, that translates to roughly twice the usage time before you need to plug it in again.
To charge your battery, screw it onto the USB adapter and insert the USB plug into the wall charger. While the battery is charging, the USB light should be red. When the device is done charging (usually after 4-5 hours), the USB light will be green.
To turn your battery on and off, press the power button 5 times rapidly. Hold the power button to power your device.

Watch the Review HERE!

 


 DIY 

Juice Bottles

If your gonna Make it....ya Gotta Bottle it!

And we have Glass & Plastic Bottles in 30ml and 15ml Sizes and in Cobalt Blue Glass with Eye Dropper or Clear Plastic with Needle Tip...PERFECT for any DIY Project!

 


Schneider Sez "Git Yore Ass on down to my Dad's Store and start Making yore OWN E-Juice TODAY!!!"

And if ya dont know HOW to make your own juice...Just ask harry! he is ALWAYS happy to show ya how it's done...

AND, if ya wanna re-build your own Coils and begin your journey down the ol RDA path...again...Just ask harry! he'll be HAPPY to show ya how to build your coils and get to Vaping the RDA WAY!!!!


 


Council of Vapors!

The very BEST MODS, TANKS & RDA's in the WORLD!

The "KINDRED" MOD

 

 

With minimal voltage drop, magnetic firing trigger, dual screw silver plated copper contacts, and its recessed reverse locking ring, the Kindred has some of the best features in the mod market. A solid device, even through all the drops. Believe us when we say, “it cranks.” It’s been our workhorse mod day in and day out. Even when the battery is at half power, you’ll still hear that juice sizzle. 

Features:

 - Easy 510 Connection
- 18350, 18500, 18650 Compatible
- Magnetic Firing Trigger
- Reverse Recessed Locking Ring
- Silver Plated Copper Contacts
- 4 Digit Serial

MSRP: $120.00 US


The "ARIS PRO"

The beautifully crafted glass cap makes this atty shine. Upgraded from the original Aris atomizer,the increased airflow channels allow you create majestic clouds. Features little to no leakage since the incoming air is isolated from the drip well. 24K gold platted posts are machined into the atomizer base – and will never spin out on you. Single and dual coil builds mount easier than ever. The 6.6MM deep drip well engorges on more e-liquid and cotton than any other dripper around. Whether you are looking for something that looks great on your MOD or for something that works well, the Aris Pro brings the best of both worlds.

Aris Pro - the champion of atomizers – brings you an unrivaled experience. It is a spectacle that drives both form and function to vapers across the nation.

- Upgraded O Rings

Features:
- 510 Thread Compatible
- 24K Gold Plated Posts
- Increased Airflow Channels
- 6.6MM Deep Well
- Full Glass Cap & Full Glass Drip Tip
- Negative Post Adjustment

MSRP:$45.00


The "STRATOS"

The Stratos offers 4 different sets of atomizer coil heads. It doesn’t matter if you’reusing a mechanical mod or something that can crank up the wattage, we’ve got an atomizer coil for your needs. Another standard with Stratos is sitting below the belt is our innovative airflow draw control system - clicks into place, so that once you set it, you can forget it. Lastly if you’re big on drip tips and want to change it up, the Stratos comes with its own glass tip and it will sit nicely, this will complete you.

There are some days when you feel like dripping, and then there are some days when you don’t. Say hello to the Stratos tank. A fully enclosed glass tank leaves you without the need to drip.

The Stratos features solid body construction. One version boasts full stainless steel, while the other takes the show with 24k gold plated brass. Oxidation is a thing of the past. Why use a Stratos tank you say? The answer is simple, you won’t have to drip. Take it on the car ride, or your next day out. 

 

Features:

- 510 Thread compatible
- Replaceable Coil Heads: 0.8Ω, 1.2Ω, 2.0Ω, 2.4Ω
- Adjustable Airflow control
- Full Glass Reservoir
- Full Glass Drip Tip

Available in:
Stainless Steel & Gold Plated Brass

MSRP: $45.00 US 


The "ROYAL HUNTER" RDA

With a clean look of matte black and gold, the simplistic design of the Royal Hunter packs a whole lot of cloud creation from a larger than life atomizer. Culture burned from the bottoms of the earth created the matte finish that you see on the Royal Hunter. Don’t let the beauty in its design disguise the potential it contains. With its high flow wide bore drip tip – its unlike any other drip tip you’ve seen. Created for the experienced vapor, coil build options are endless. Larger terminating posts will indulge in larger wires and more cotton for less dripping. If your looking for something that competes with the best of the best – the Royal Hunter brings it for you on the battlefield where true champions are crowned. 

We introduce the champion of cloud and flavor chasing – the Royal Hunter. 

 

Features:

- Material: Black Matte & Brass / Stainless Steel
- Diameter: 22mm
- Height: 24mm
- Weight: 31 grams
- 20 gauge wire+
- 4 Digit Serial

MSRP: $45.00 US

 

And there you have it! Harry Promised you the VERY BEST TANKS, MODS and RDA's IN the WORLD,

and as usual, I KEPT my WORD! 

 

Here you have THE Very FINEST Quality MODS, TANKS & RDA's to be found ANYWHERE! And ONLY here at Harry Smooth's!

 

You wont find Council of Vapors Products ANYWHERE within a 20mile Radius!!!!

Check and see! NO WHERE!!!

Just lil ol ME!!!!! So COME on in and Treat yourself to the VERY BEST!

 

 

 

The "GRIPPER" MOD 

This unregulated Grip mod operates on a single 18650 Battery accompanied by Military Grade Internals. The Grip used in this Patent Pending Design is an ACTUAL AR-15 Grip that if seperated from the Body would Bolt Straight up to an AR-15 Rifle!

The Grip is also Filled with a Special "Thermally Conductive Resin" that serves as a Heat Sync to keep Battery Temperature Down. the MOSFET used in the Gripper Mod is the same as the ones used in an F-14 Fighter Jet and Each Gripper is Sealed makinig the Mod Water and Juice Resistant!

  • Features:
  • Single 18650 Battery Slot
  • Full Floating Point Contacts
  • Heavy Guage Wire to achieve nearly ZERO Voltage Drop
  • Water/Juice Resistant
  • Button wont fire until Flush with Mod
  • Special Thermally Conductive Resin Serving as Heat Sync for Battery
  • Miltary Grade Internals
  • Same MOSFET as the ones used in F-14 Fighter Jets
  • Not to Mention, the COOLEST Friggin MOD on the PLANET!!!!!! LOL

 

Military Grade "Pelican Box" Available for your Gripper as well!!!!


Just In!

WOTOFO's "AUTHENTIC"

TROLL & FREAKSHOW RDA's!!!!

And

The New "AUTHENTIC" DOGE X2 is IN THE HOUSE!!!

 

The AFC slots on the V2 Doge have been replaced by the X2’s step up/down airflow control with twin nine-hole staggered diameter patterns along the barrel. Simply twisting upper/drip top allows you to open or close 2, 4, all the way to 18 air holes sequentially. The result is vortex action on the draw which is further enhanced by the Doge X2’s 2mm air injection hole above the outer barrel to cool vapor and increase expansion. Reviewers loved the air injection hole on the Doge V2, now the hole is twice as big and it’s milled at an angle so that air is drawn directly towards the conical 14mm drip top.

The new Doge X2 is made of three pieces of high-grade 302 stainless steel cut to super accurate tolerances. The deck section features a keyed 3mm positive post made from C110 copper that can be switched out for an included stainless steel post. Negative posts are stainless steel and are milled directly into the deep juice well. All three posts have giant copper screws and 3mm holes that accept large gauge wire and are suitable for single, dual or quad coil builds.

Scour the internet; you will not find ANYTHING like the Doge X2 for under $50. The Doge X2 is a competitive fog machine that leads the pack.

Details:

  • Huge 14mm competition drip tip
  • Includes extra SS posit post, extra o-rings, extra peek insulators and extra screws
  • 510 threads
  • 5mm deep juice well
  • Serialized
  • Designed in the USA
  • Purpose built for competitive cloud chasing!

YUP, And Harry has GOT EM!!!!

So C'MON in and GET EM!!!


 

 


 

 

NEW STUFF!!!

New TESLA ONE and TESLA TWO

100Watts of SCREAMIN POWER!

The Tesla ONE Above!

Tesla One Sub Mod Features

  • Material: Carbon Fiber plus Brass
  • Electrode: Brass Plated Silver
  • Dimensions: 22x87mm
  • Capacity: 1800mah
  • Max Output Power: 100Watts
  • Max Output Voltage: 4.2V
  • Max Output Current: 40A
  • Atomizer Resistance: 0.1 - 3.5 ohm

 

And...the Tesla TWO Above!

Tesla Two Sub Mod Features:

  • Color: Black/Grey
  • Material: Aluminum
  • Electrode: Spring/Copper Plated Silver
  • Dimensions: 22x47x76mm
  • Capacity: 4000mah
  • Max Output Power: 100Watts
  • Max Output Voltage: 4.2V
  • Max Output Current: 40A
  • Resistance: 0.1 - 3.5 ohm

 


 

KANGER SUBOX MINI is HERE!!!

Thats Right folks, the Long Anticipated Kanger SuBox Mini is Finally Here! 

And where are you gonna Find em???? Heh Heh....You GOT it.....Right here at Harry Smooth's! EVERYONE is "Out of Stock"...Heh heh, Not HARRY's!!!!

And these Babies Look AWESOME!!!!! Two Colors, Bad Guy BLACK and Good Gal White!!!!! Heh heh Heh....Which one are YOU?

Characteristic:

  • 510 Drip TIp
  • OCC 0.5 Ohm Direct Lung Inhale from 15W to 60W
  • OCC 1.5 Ohm Mouth to Lung inhale from 10W to 26W
  • Improved RBA, work in Higher Wattage and Easy Assemble
  • SUBTANK Mini with Aqueous Ceramic Coating
  • NEW Air Flow Design
  • KBOX Mini Output 50W Supports 0.3 Ohm

In the Box:

  • KBOX Mini
  • SUBTANK Mini
  • OCC 0.5 Sub Ohm X1
  • OCC 1.5 Ohm X1
  • RBA Coil X 2
  • RBA Mini Plus Base X 1
  • Manual X 1
  • RBA Desk Screw X 2 Cover Screw X 2
  • Screw Driver X 1
  • Japanese Cotton Sheet
  • USB Cable

  • KBOX Protection:
  • \Short Circuit Protection, OLED Flash and Display
  • Atomizer Open Circuit, OLED Flash and Display
  • Cell Reverse Protection, No Power Output when Cell Reverse
  • PCB Over Temp Protection and Battery Stop Function with OLED Display "TEMP HIGH"
  • 10 Sec Overtime Usage Protection, No Power Output and OLED Display "IOS OVER"
  • Cell Capacity Protection when Cell capacity drops too low, cell indicator will Flash

AND...JUST IN! The ALL NEW Kanger Subox Mini, SILICONE PROTECTIVE CASES!!!!  Protect your Investment with one of THESE Babies!!!! All Colors, ONLY at Harry Smooth's!!!!!


So Sweet!

The New HELLBOY & MADHATTER RDA's...


And Talk about SWEET....Check out my SMOK X-Pro M80 with a HellBoy RDA and Jade Stone DripTip!!! Dont get much Sweeter than THIS Folks!!! heh heh


 

 


INNOKEN MVP 3.0 PRO-60Watt

KIT w/iSub G Sub-Ohm Tank

WOW...what an AWESOME Unit! Ive been putting this one thru its paces, and just like its lil Brother the MVP3.030W this one PERFORMS like you wouldnt BELIEVE! A BLISTERING 60 WATTS of Power and just like the lil Brutha, charges my iPhone, Android, or any Other Device utilizing a USB or MicroUSB!!! What a MACHINE!!!! WOW!!!!!!!!!!

AND this Baby comes with EVERYTHING you need to jump RIGHT into Vaping!!! Well....ya DO need some Juice LOL....But it comes WITH the 60Watt Box Mod, a Sub-Ohm Tank, 510-Ego Adapter, Charging Cable, and like its predesessor it will charge your iPhones, iPads, Androids or any other Mobile Device WHILE you Vape! Now you tell ME, what other Device can do THAT?: heh heh heh

Yup, Looks just like the old MVP30 but its NOOOOOOOOTTTT!!

This the the All new MVP3.0 PRO 60 Watt! All the Awesome Features of the old MVP30 but with a Blistering 30 More Watts!!!!

AND...This KIT comes with EVERYTHING you Need to Start SUB-OHMING, except the JUICE!!!

(is "SubOhming" even a WORD??? LMAO)

With 60 Watts, a Long Lasting 4500mah Battery, and the TOP Performing Pyrex Glass iSub G Tank, this baby is the Hit of the YEAR!

The MVP 3.0 Pro Kit Features:

  • Dimensions: 4"L x 1-3/4"W x 7/8"D
  • Operating Voltage: 3.0V-9.0V
  • Operating Wattage: 6.0W-60.0W
  • Battery: 3.7V 4500mah
  • Atomizer Resistance: 0.2ohms (Min)
  • Power Bank (Charges Portable Devices via Built in USB hub)
  • Precise RMS DC Current accurate Power deviation of 0.5W and fires from 0.2-3.1ohms
  • 3x clicks off/on
  • Standby Current 200uA max
  • Max Output Wattage:60W
  • Max Output Current: 17.5A
  • Max Output Voltage: 9V
  • Charging: Micro USB DC5V/1A
  • Output Port:DC5V/1A
  • Pass Thru Capable

 

The iSub Tank Features:

  • 100% Stainless Steel
  • High Quality Pyrex Glass Tank
  • Japanese Organic Cotton Wick
  • Huge 4.5ml Capacity
  • Full Adjustable Air Flow
  • No Spill Coil Swap System
  • 0.5 ohm Sub Coil-20w-35W

 

In the Package Comes:

1x-Innoken iTaste MVP3.0 Pro 60W

1x-iSub G Sub Ohm Tank with Coil

1x- USB Charger

1x-EGO Adapter

1x-User manual

WARNING:

These are Advanced User Sub-Ohm Coils! SubOhm Tanks are designed to work with Mechanical MODS and/or Devices capable of vaping at 30 Watts or Higher! YOU are Responsible for making sure your MOD and Batteries are Capable of Working Properly with SubOhm Coils. If you are using an Electronic Mod, you are also Responsible for making Sure it can handle the Amps required. For Mechanical Mods use 30+ amp Batteries Please! Use the Ohms law Calculator, and check your Amps and be Safe! We CARE about your Safety!!!

Thanks...Harry


ELEAF 20, 30 & 50Watt Silicone Battery Cases Skin Sleeves!!!

PROTECT your Valuble Investment with one of THESE Babys!


Drip Tips out the WAZOOOOO!!!

Need a Drip Tip? Is your Tank looking

B-O-R-I-N-G?

JAZZ that Puppy UP with one of Harry's

COOL-ASS Drip Tips!!!!

Ohhh Yeah baby!!!

THATS What I'm Talkin About!!

YEAH!

Yup......

Uh Huh.....

Woooo HOO!

MAN, I just LOVE me some CoolAss DripTips!!!! WOW!

 


VAPESOX!!!

Ever try to tote around 2 or 3 MODS, Juice, Cotten, Wire, Etc??? Well, your Troubles are OVER! The New VAPESOX Does it ALL! And Stylishly as well!!! Carry all your Favorite "Vaping Stuff" around with ya now in STYLE with VAPESOX! 4 Different Sizes, 5 Different Colors & Styles!


THe New

SMOK X-Pro M65

·                            

·                    

Like it's BIG Brother, the X-Pro M80, 

The New XPro M65 by SmokTech is a Small Device with GREAT Wattage Capacity! At about HALF the size of a Typical 30 Watt Box Mod, this device boasts a Whopping 65 Watts of Power!

Features Include:

  • Variable Wattage:6-65 watts in 0.1W Increments
  • 510 Spring Loaded Brass Connector Pin
  • Mech Mode Function
  • Over-Temp Protection
  • Low Voltage Warning (Lower than 3.4v)
  • Short Circuit Protection
  • Micro USB Charging
  • Resistance Range of 0.2 to 4.0 ohms
  • Requires 1x 18650 Battery (Not Inlcuded) Are they EVER? LOL

In the Box:

  • 1x-XPro M65 Box Mod
  • 1x-Micro USB Charging Cord
  • 1x-Hex Allen Wrench
  • 4x-Hex Head Cap Screws
  • 1x-Ego Adapter
  • 1x-User Manual





And Now comes the "Ferrari" of Box Mods!!! 

THe Mighty Sigelei 150W!!! 

 

Capable of a WHOPPING 150 Watt Output, the Sigelei 150W Packs a PUNCH, Especially for it's Price! THis Device is a "Dual 18650" with a Strong Magnetic Black Panel for Ease of Switching Batteries. Batteries cannot be charged within the Device, wish is why the Magnetic Panel comes in Handy.

Featuring a Bright OLED Screen, checking the Settings of your Device is a Breeze.  TZhe 510 COnnector Pin is Spring Loaded, so any Atomizer will Screw Down TIghtly and FLush. 

Many Protection Features include, Low Voltage Protection, Reverse Battery Protection and Short Circuit Protection as well.

 

  • Specifications
  • Variable Wattage Operating Range: 10.0W - 150.0W
  • Lowest Atomizer Resistance: 0.1Ohm
  • Battery Capaicity Required: 7.4V -8.2V
  • 2x 18650 Batteries Required (Not Included)

 

Features

  • Visual Operating System
  • Variable Wattage
  • Low Voltage Protection
  • Low Resistance Protection
  • High Voltage Warning
  • Short Circuit Protection
  • Reverse Polarity Protection
  • High Temp Warning
  • Uses Replaceable Batteries

Error Codes:

  • "Low Res": Resistance is below Operating Range
  • "Low Bat": Low Battery Input Voltage
  • "HHHHHH" High Battery Input Voltage
  • "Too Hot": High Operating Temperature. 

In Short, for the Person who has the VERY BEST of EVERYTHING!!! Want the State of the Art, Top opf the Line"? The Sigelei 150W is the Mod for YOU!

And COMING VERY VERY SOON.....

The AWESOME 

Sigelei T-150 Touch Screen!!!


And... the SMOK X-Pro M80 !!!!! BAD ASS!!!!!!

One of Harry's FAVORITE Box Mod's!!!!!

THIS lil BaddAss has Quickly become my FAVORITE Box Mod in my Arsenal! SO many Features its tough to list them all! But this lil Jewel has em!!! TONS of Features!!! And it has become MY FAVORITE MOD's of ALL!!!! I have Mine Coupled with a New Aspire Atlantis SubOhm Tank, and WOW! THis New "Cyclops Vapors Sure does taste AWESOME Out of it!!!!

Check it out!!

We also have the SMOK R80/Micro One Kits AND the 200Watt SMOK as well!


 Featuring a battery capacity of 4400 mAh, the XPro M80 Plus allows most vaper to enjoy a longer and stronger vaping experience.

With two built-in 18650 Li-polymer batteries and a USB charging port, this device can be charged through your computer. Also featuring a passthrough charge, you are able to vape and charge your device at the same time.

With 80 watts to play around with, along with temperature control, this remarkable box is sure to make you acquire your specific setting.




And the Sigelei Mini 50W!!!! Now this is a BAD lil Beast in Itself!!!!

Like its Big Brother, the Mighty Sigelei 150, the 50W packs a WHOLLUP all on its own!

AND like ALL of the Sigelei Mods, this one comes with a Rubber Sheath to Protect your Investment as well as keeping your Batteries where they Belong!~

 

 

The New Innoken MVP30Watt!

This baby has ALL the Bells & Whistles! Boasts a Whopping 30 Watts of Power, and 9Volts!!! And this is my Every Day MOD! I use the CellPhone charging Feature a LOT too!



 

Notice my Diamondback Rattler Wrap!!! heh heh heh And what a Dumbass, Vaping, Charging my iPhone, and Puttin on my Scoot (Notice the MC Helmet? LOL) All at Once! But thats the Cool thing about these Innoken MVP Series Mods...you CAN Ride your Harley, or go Fishing, or anything ya want, WHILE Charging your Phone AND Vaping at the Same time!!! WOO HOOOOOOOO!

  
 
 
Innokin iTaste MVP3.0 - 30 Watt

The iTaste MVP3.0 is the newest in the line of internationally bestselling iTaste MVP vaporizers and sets the standard for top quality, high capacity, powerful and smart advanced personal vaporizers.
Designed and upgraded based on feedback from vapers, top reviewers and friends from all over the world. The iTaste MVP3.0 is more powerful with a maximum output of 30 Watts and it can fire a wide range of coil resistances from 0.4 to 2.5 Ohm.

Made with the highest quality materials the iTaste MVP3.0 is designed to be your powerful and reliable every day vape. Initially available in four sleek designs the iTaste MVP3.0 has a flush 510 thread connection with a gold plated spring loaded positive pin, durable stainless steel threading and an included ego threading adaptor for maximum compatibility.

The large OLED screen clearly displays all important information including tank-coil resistance (Ohm), wattage & voltage and remaining battery power. The intelligent two button interface makes it easy to quickly find and set a precise power output to give you a perfect vape of flavor and clouds. Pushing the two buttons together displays the secondary screen with an Ohms meter, battery level indicator and puff counter.

You should never have to wait to vape and the iTaste MVP3.0 is charged via a side micro-USB port and features Innokin's 'Vape while charging' technology so you can always be vaping.

Advanced safety features including 15 second firing cutoff, low voltage warning, atomizer short circuit protection and over discharge protection means you can vape with confidence.

You can use the MVP3.0's high capacity 3800mAh internal battery to charge your electronic devices via the replaceable integrated micro-USB charging cable or USB port.

The iTaste MVP3.0 has a variable voltage range of 3.0 - 9.0 Volts adjustable in 0.1 volt increments and a variable wattage range of 6.0 - 30.0 Watts, adjustable in 0.5 watts increments. The iTaste MVP3.0 uses vRMS DC current and is very accurate with a power deviation of 0.1 Watt. The full 30 Watt output is precisely maintained between resistances of 0.4 to 2.5 Ohm. There is no wasted power and exact accuracy means you are always vaping the power level that you choose. vRMS provides superior precision in delivering the exact wattage Ohm's Law requires and stable power means better vapor.

Features and Specs:


Dimensions: 4" x 1-3/4" x 7/8"


Battery Level Indicator:
The iTaste MVP3.0 e cgiarette battery has a tri-color LED on the top.
Green = Almost fully Charged. When the iTaste MVP3.0 is fully recharged the top LED light will power off.
Yellow = Half Power.
Red = Low Power. Charge the MVP3.0. 

Variable Voltage:
Voltage can be adjusted from 3.0 – 9.0 volts in .1 volt increments. 

Variable Wattage:
Wattage can be adjusted from 6.0 – 30.0 Watts in .5 watts increments.

Low Voltage Warning:
The Red LED and Battery bar will continue blinking when the battery capacity is lower than 3.3V and the iTaste MVP3.0 Advanced Personal Vaporizer will automatically power off. 

Short Circuit/Atomizer Protection:
Short Circuit/Atomizer Protection protects the iTaste MVP3.0 Advanced Personal Vaporizer against shorted atomizers and will stop the unit from functioning in unsafe conditions.

The iTaste MVP3.0 features automatic real-time atomizer Ohms detection. If the resistance of the atomizer is lower than 0.4 the Ohms bar will blink and the MVP3 will not power on. 

‘Vape while charging’ Technology
The iTaste MVP3.0 is recharged with a Micro USB cable. When plugged into a power source the iTaste MVP3.0 can also be vaped and charged at the same time with Innokin Technology’s ‘Vape while you charge’ pass-through technology. 

Remembers last Voltage or Wattage setting:
When the iTaste MVP3.0 is turned off it will remember the current voltage or wattage setting and it will retain the setting when the iTaste MVP3.0 is powered on. 

Portable power source for electronic products:
To charge your portable electronic device with the iTaste MVP3.0 plug the built-in Micro USB cable into the electronic device and power on the MVP3.0. The included iTaste MVP3.0 starter kit charging cable can also be used. Plug the larger USB port into the MVP3.0 and the Micro-USB into the electronic device and power on the iTaste MVP3.0. You may only charge one electronic device at a time. Do not attempt to charge more than one device at the same time or you may damage the device.

High compatibility 510 connector:
The iTaste MVP3.0 510 threading is compatible all standard 510 clearomizers & atomizers including the iClear16, iClear16B, iClear16D, iClear30, iClear30B, iClear30S and the Gladius-M

Integrated Safety Mechanism/Reboot
The Innokin iTaste MVP3 has an integrated safety mechanism which shuts off the device and requires power to reboot. This safety feature has been integrated to protect against damage to the PCB caused by coil short circuits, battery over-discharge and damaged clearomizers/tanks with decreased resistances. If your MVP3 is unresponsive, connect it to a wall or computer powered micro USB charging cable and the device will reboot.


Technical Specifications:

  • Operating Voltage: 3.0V-9 V
  • Operating Wattage: 6.0W-.30W
  • Built In 3800mAh Battery
  • Standby current: 100uA max
  • Maximum output Wattage: 30W
  • Maximum output Current:10A
  • Maximum output Voltage: 9V
  • Clearomizer Resistance: 0.4 Ohm (minimum)
  • Charging: Micro USB DC 5V/1A
  • OUTPUT port:DC 5V /1A

 Did someone say POWER? Ever heard the Expression Dynamite comes in Small Packages? HEH HEH....Well here ya goi Folks...The eLeaf, iStick 50 WATT Bad Ass!!!! Small.....yet POWERFUL!!!!



 

 

 

 

 

Description

 
 
Eleaf iStick 50W Box Mod

iStick 50W is a super upgraded version based on iStick series batteries. Powerful vapor can be generated due to the expanded range of output voltage (2V-10V) / wattage(5W-50W) with 4400 mAh battery capacity. It retains strong spring connector and wear-resistant stainless steel thread. Moreover, the additional temperature alarm function makes it high-safety even in strong vaping. Great feeling when you hold it because of its size and the rounded edges, while side charging port is also a plus. 

Features and Specs:

  • Dimensions: 3-1/4" x 1-3/4" x 7/8"
  • 510 Threaded
  • Variable Wattage (VW) and Variable Voltage (VV) mode
  • Maximum Output Wattage: 50 Watts
  • Adjustable Voltage: the voltage is adjustable from 2.0V to 10.0V
  • Adjustable Wattage: the wattage is adjustable from 5W to 50W
  • Minimum Resistance: from 0.2 ohm
  • Built-in battery: Capacity 4400mAh - to last all day long
  • Incremental OLED screen: battery condition, atomizer resistance, wattage and voltage
  • Battery Protections: atomizer short circuit protection, over 10 second protection and low voltage protection (battery lower than 3.3V)
  • Micro USB rechargeable: supports charging with a 1Amp wall adaptor which is faster
  • Temperature Alarm function: If the temperature of device is over 70℃, the output will shut off automatically and the screen will reflect "Temp Protection" for 5 seconds.
  • Side Charging Port: The USB charging port is on the side of battery
  • Spring Connector and Stainless Steel Thread: The spring connection base ensures its high adaptability. The connecting thread is made of stainless steel which makes it more durable

 

 

 


eLeaf Mini

 

Again, small in size, BIG on Power!!! This is a SWEET lil MOD, and paired with a Kanger Sub Tank NANO, you have one FORMIDABLE lil Beast!!!!

 

Description
 
Eleaf iStick Mini 10W Box Mod Kit

The Eleaf Mini iStick 10W Box Mod is miniature variant of the Eleaf iStick 20W Box Mod. The Mini 10W Mod is very user friendly and about half the size of the original iStick. The Mini iStick has a ton of notable features, such as the OLED screen situated next to the 510 connector at the top of the Mini Mod. Not only is this tiny mod convenient, it has the capability of handling up to 10W and has a battery capacity of 1050mAh! This device is the perfect choice for someone who is in the market for a stealth yet powerful mod.

The Eleaf iStick can be had in 4 different colors: Black, Silver, Pinkish Red, Blue. The Eleaf iStick has multiple protections such as atomizer short circuit protection, over 10 second protection and low voltage protection. Pairing the Eleaf iStick with the Aspire Nautilus Mini is a no brainer and will make an absolutely amazing setup capable of delivering the most amazing vaping experience.

Please note: Wattage is not adjustable. Only the voltage is adjustable from 3.3V to 5.0V.

Features and Specs:

  • 510 Threaded
  • Variable Voltage (VV) mode
  • Maximum Output Wattage: 10 Watts
  • Adjustable Voltage: the voltage is adjustable from 3.3V to 5.0V
  • Atomizer Ohm capability: from 1 Ohm to 3 Ohm
  • Built-in battery: Capacity 1050 mAh
  • Incremental OLED screen: battery life percentage and adjustable voltage
  • Battery Protections: atomizer short circuit protection, over 10 seconds protection and low voltage protection (battery lower than 3.3V)
  • Micro USB rechargeable: supports charging with a 1Amp wall adapter which is faster
  • Dimensions: 2" x 1-1/4" x 13/18"

 

 


eLeaf 30Watt

Yet another Mid Sized MOD fromn eLeaf!!!

Our BIGGEST Seller, the eLeaf 30w is the "Stepping Stone" for most people graduating from a standard "EGO Style" E-Cigarette to a Mod!!! Featuring Variable Voltage/Wattage and a Big LED Display and LOTS of Power, the eLeaf 30w is a GREAT Choice for those that want to DUMP the EGO Style E-Cigs and Break into the World of Box Mod Vaping!!!!   Paired with an Aspire Nautilus Mini, or a Kanger SubTank "Nano", this is an AWESOME lil Unit to Begin with!

Description
 
Eleaf iStick 30W Box Mod Kit

The Eleaf iStick 30W is upgraded based on the popular Eleaf iStick 20W through expanding the range of output voltage, wattage, and the ability to fire sub-ohm atomizers. Capable of firing 30 watts and firing down to 0.4ohm, the iStick 30W looks and performs very similar to the previous version, but better. Under the support of 2200mAh battery capacity, it will give you a great performance between 2V-8V or 5W-30W. Newly introduced spring connector, wear-resistant stainless steel threads, and streamlined design on top make iStick 30W more suitable for atomizers. Also, the added button lock functionality protects the buttons and prolong the device's life. iStick 30W is the one you deserve to own.

The 510 connection is now spring loaded, allowing for a better contact to your 510 atomizers. The updated design of the iStick 30W incorporates a 22mm lip surrounding the stainless steel threaded 510 connection for a more flushed look with your 22mm atomizers.

The Eleaf iStick can be had in 4 different colors: Black, Silver, Magenta Red, Blue. The Eleaf iStick has multiple protections such as atomizer short circuit protection, over 10 second protection and low voltage protection. 



Features and Specs:

  • 510 Threaded
  • Variable Wattage (VW) and Variable Voltage (VV) mode
  • Maximum Output Wattage: 30 Watts
  • Dimensions: 3-1/8" x 1-5/16" x 13/16"
  • Adjustable Voltage: the voltage is adjustable from 2.0V to 8.0V
  • Adjustable Wattage: the wattage is adjustable from 5W to 30W
  • Minimum Resistance: from 0.4 ohm
  • Built-in battery: Capacity 2200 mAh - to last all day long
  • Incremental OLED screen: battery condition, atomizer resistance, wattage and voltage
  • Battery Protections: atomizer short circuit protection, over 10 second protection and low voltage protection (battery lower than 3.3V)
  • Micro USB rechargeable: supports charging with a 1Amp wall adaptor which is faster

 


 

INNOKIN MVP20W

 

 This was my VERY FIRST Box MOD!!! NICE lil Unit too!!!! AND, we have Vinyl WRAPS for these in MANY MANY different Themes!!! Just click anywhere in this text or the Picture above to go to Wraps Pg...scroll down the page and you,ll see some of the wraps!

OUTPUT port :DC5V /1000mA

The MVP20W is the newest in the line of bestselling Innokin Technology iTaste MVP vaporizers and features a wider range of Variable Voltage and Wattage, advanced safety features, a long lasting 2600mAh battery, ‘Vape while you charge’ technology and the MVP20W e cigarette can also be used to charge your mobile phone and other electronic devices. 


The Primary Features of The MVP20W 

Variable Voltage: 
Voltage can be adjusted from 3.3 – 7.5 volts in .1 volt increments. 

Variable Wattage: 
Wattage can be adjusted from 6.0 – 20.0 Watts in .5 watts increments. 

Battery Level Indicator: 
The MVP20W e cigarette battery capacity is displayed via green, yellow and red LED. 
Green = Almost fully Charged. When the MVP20W fully recharged the LED light will power off. 
Yellow  = Half Power. 
Red = Low Power. Charge the MVP20W. 


 Kanger KBOX


Description The KBOX Mod by Kangertech brings 40 watts of power in a simple set and forget package, offering extraordinary value with more than ample power!
Introducing the KBOX Mod, the first box mod by Kangertech, offering 40 watts of power in a simple, elegant, and extremely affordable package! Easy to use preset wattage settings offer 7 different options for .4 ohm and above atomizers, coming in increments starting at 8 watts all the way to 40 watts!

A simple press of the wattage button cycles through the preset settings while battery life is displayed parallel to the wattage settings, providing instant feedback. Automatically adjusting depending on coil resistance, the KBOX monitors and adjusts output for consistent and accurate output. Utilizing a single 18650 battery (not included) the KBOX is designed for easy battery exchange.

The KBOX chassis is manufactured out of aluminum, providing a light but durable feel, while the enclosure is ergonomically designed to rest comfortably in the palm of your hand. A spring-loaded brass 510 connector ensure constant and consistent contact with all standard 510 atomizers, accommodating atomizers with a diameter of 25mm! Featuring full protection, including short circuit, reverse battery, low resistance, and over-time use protection, the KBOX is perfect for beginners while also offering the flexibility to find a place in the collections of even the most experienced vapers.

Simplicity and functionality, at an extraordinary price. The KBOX 40 Watt Box Mod by Kangertech.
*18650 Battery and Charger NOT included!
**Must use 20 A or higher IMR/INR high discharge battery!
Product Features:7 preset wattage settings8 watts, 13 watts, 20 watts, 25 watts, 30 watts, 35 watts, and 40 wattsAutomatically adjusts and monitors wattage based on coil resistanceFires .4 ohm resistance coils and aboveUtilizes a single 18650 (NOT included)

Battery life indicatorAluminum chassisErgonomically designed to fit comfortably in the handShort circuit, reverse battery, low resistance, and over-time use protectionSpring-loaded brass 510 connection
Product Specifications:Height: 89mmLength: 40mmWidth: Min 20mm, Max 25mm
Product Includes:One KBOX 40 Watt Box Mod by KangertechOne Instruction Manual

 


Copyright 2012 Harry Smooth's Tobacco & Vape Shop. All rights reserved.

Web Hosting by Yahoo!

Harry Smooth's Tobacco & Vape
221 South Hopkins Ave
Titusville, FL 32796
United States

ph: 321-264-4899

harry@harrysmooth.com

Follow us:TwitterFacebook

VeriSign Trust Seal